Pack & fill verification
Food and Drink inspection
Under-fill is a giveaway, over-fill is a rejection by the retailer and an unreadable date code is a return. We check every single unit before it goes onto a pallet.
Food and Drink
Under-fill is a giveaway, over-fill is a rejection by the retailer and an unreadable date code is a return. We check every single unit before it goes onto a pallet.
- Fill level, cap torque & seal test
- Date code, lot, label OCR
- Foreign material, damaged pack & case count inspection
CellArea scan with high-power strobe and backlight · IP69K stainless washdown · heated window against condensation
Where the money is
Periodic checkweigher and manual checks
Every unit verified before palletising
Pays back through: overfill giveaway, retailer rejections and complaint handling.
Your rupee figure is modelled from your own scrap, rework and warranty numbers during Assess & Feasibility.
| Unit ID | Inspection result | Severity |
|---|---|---|
| BT-2201 | Foreign object detected | Critical |
| BT-2204 | Under-fill −12 ml | Level 2 |
| BT-2209 | Cap seal incomplete | Critical |
| BT-2213 | Date code unreadable | Level 1 |
| BT-2216 | Label misaligned | Level 1 |
| BT-2220 | Pass — all checks | None |
Illustrative output. Detection performance is measured on your parts during feasibility.
Start here
Send us the component.
We will let you know if it is visible.
Send 30-50 samples of your good parts, your failure modes. We do imaging trials, train a model, and come back with what we measured, including the cases where the answer is no.