Device & sterile pack inspection
Medical Tech inspection
A needle burr that arrives at a patient is a field action. We examine every unit under magnification, and record the record right into your design-history file.
Medical Tech
A needle burr that arrives at a patient is a field action. We examine every unit under magnification, and record the record right into your design-history file.
- Bond checks needle tip, cannula and tubing
- Sterile barrier seal & pouch integrity
- UDI / label and lot traceability verification
CellTelecentric with collimated backlight · diffuse front light for bond lines · cleanroom-compatible · validated change control
Where the money is
Sampled manual review under magnification
Every unit, with a record for the design-history file
Pays back through: non-conformance investigation, scrapped lots and field actions.
Your rupee figure is modelled from your own scrap, rework and warranty numbers during Assess & Feasibility.
| Unit ID | Inspection result | Severity |
|---|---|---|
| SY-1102 | Needle tip burr | Critical |
| SY-1108 | Barrel crack | Critical |
| CT-0455 | Weak tubing bond | Level 2 |
| IV-7781 | Seal channel in pouch | Critical |
| DG-2290 | UDI label unreadable | Level 1 |
| SY-1115 | Pass — all checks | None |
Illustrative output. Detection performance is measured on your parts during feasibility.
Start here
Send us the component.
We will let you know if it is visible.
Send 30-50 samples of your good parts, your failure modes. We do imaging trials, train a model, and come back with what we measured, including the cases where the answer is no.